How To Install Drop-In Anchors

Drop-in anchors are heavy-duty anchors that provide excellent fastening strength in concrete surfaces. They are internally threaded expansion anchors used to secure fixtures and equipment in industrial and structural applications. This guide provides step-by-step installation instructions for drop-in anchors.

Tools You Will Need for Installing Drop-In Concrete Anchors

• Hammer drill
• Correct diameter drill bit
• Hammer
• Setting tool

Drop-In Anchor Installation Guide

Step 1: Drill the Hole for the Drop-In Anchor

• Mark the location for the anchor
• Drill a hole to the correct depth using a hammer drill and the recommended drill bit

Step 2: Clean the Hole for Proper Drop-In Anchor Seating

• Remove dust from the hole using a brush, compressed air, or vacuum
• This will help the drop-in anchor seat properly into the hole

Step 3: Insert and Set the Anchor

• Place the drop-in anchor into the hole with the open end facing up
• Tap it lightly but firmly until flush with the surface
• The setting tool will expand the anchor until it is secured in the concrete

Step 4: Install the Bolt or Fastener

• Thread a bolt or machine screw into the set anchor to secure your fixture

Tips for Best Results When Installing Drop-In Anchors

• Verify that the hole depth and diameter match the anchor’s specifications
• Make sure the anchors  are rated for your application’s load requirements
• Don’t reuse drop-in anchors if you remove them; they may not hold securely

Looking for a Drop-In Anchor Supplier? Springs Fastener Has You Covered

At Springs Fastener, we offer an extensive ready-to-ship selection of drop-in anchors and other industrial fasteners. We provide personalized service, fast shipping, volume discounts, and nationwide delivery. Whether you need standard or specialty anchors, Springs Fastener is a trusted supplier for every project.

Request a quote to start an order, or contact us today to learn how we can supply your drop-in anchors at great prices!